Pipes, all Latvia

LDCC applications and solutions:

SKYSTONE focuses on LDCC applications where the material's technical advantages provide real value to the project rather than simply replacing one construction material with another. Typical application groups include the following:

✓ filling of culverts and pipelines, including abandoned or obsolete sections; ✓ filling annular spaces around newly installed pipes and in pipe rehabilitation projects; ✓ filling abandoned basements, shafts, tunnels, tanks and other underground voids; ✓ filling hard-to-access cavities and voids beneath existing structures; ✓ trench backfilling and reinstatement where compaction is undesirable, difficult or risky; ✓ backfill behind retaining walls and other permanent structures where additional load must be limited; ✓ lightweight structural fill solutions for weak soils, roads, industrial and special construction projects; ✓ sub-base layers on ground, base levelling and filling utility zones within floor structures where flowability, load control or reduced compaction are important; ✓ closed-cell or permeable/draining LDCC solutions where required by project-specific technical needs.

LDCC is particularly suitable where additional loads on soil or existing structures must be limited, hard-to-reach areas filled, compaction-induced vibration avoided, settlement risk reduced, or rapid and controlled placement achieved in restricted site conditions. In cases involving abandoned basements and other voids beneath buildings, LDCC can be a practical alternative to the construction of new steel support structures when the objective of the project is to structurally stabilise the existing structure rather than restore the use of the abandoned space or adapt it for future occupancy. In such cases, LDCC enables the rapid and cost-effective creation of a permanent, uniform and supportive fill throughout the required volume. If a conventional solution fully achieves the project's objectives both technically and economically, there is no need to use LDCC solely as a material replacement. LDCC becomes justified when conventional solutions increase structural or ground loading, complicate execution, extend schedules, create additional risks or increase overall project costs during construction and operation.

Description: The company was founded in 2002. as a packaging production company in Liepāja. The packaging is designed for different winding materials( fabrics, films, paper, fiberglass, thread, etc) for winding, as well as for storage and transportation.

Company description::

"HYDRO TECH SERVISS" specializes in the repair of steering gear mechanisms, power steering units, special equipment hydraulic cylinders, as well as car hydraulic systems in general. It is: cars, minibuses, lorries and other modes of transport. The workshop is equipped on the basis of a car service, so we have all the conditions for removing and installing units that need repair, as well as for diagnosing the running gear of cars and minibuses. At the moment we can offer our customers a full range of repairs, power steering, steering, as well as car running gear repairs and other works. For trucks, buses( the big ones) and for special machinery we repair and restore only the removed steering mechanisms, hydraulic cylinders, hydraulic pumps and other.

The widest range of electrical materials and LED lighting:

We offer everything you need for electrical installation - from cables, wires and automation to designer switches and smart home solutions. Our specialization includes energy-efficient LED lighting for indoor and outdoor spaces, as well as industrial electrical components for complex engineering projects. In the assortment you will find brands such as Schneider Electric, ABB, Philips and many other leading brands.

Our assortment includes:

✓ lighting; ✓ cables and extension cords; ✓ automation and accessories; ✓ distribution cabinets and enclosures; ✓ installation and accessories; ✓ switches and sockets( rosette) ; ✓ connections and nozzles; ✓ industrial sockets( sockets) aND BLOCKS; ✓ heating; ✓ abrasive materials; ✓ tools; ✓ goods for home and garden; ✓ goods for sports, tourism and recreation.

Production:: ✓ 2000. series - IP20 flush and flush switches and sockets with a classic design, available in white and cream; ✓ IP44. series - IP44 surface-mounted switches and sockets for wet rooms and outdoor spaces. Elegant and functional design, available in white or gray; ✓ Assembly boxes - we produce both low-ceiling( for concrete walls and drywall), both plaster boxes; ✓ Socket blocks - we produce socket blocks.

LTD "SPMK Grobina" is a construction company, who deals with:: ✓ Construction

Construction of external networks - gas pipelines, heating pipelines, water pipelines and sewage systems; Construction and installation of internal networks - water, sewage, heating, ventilation systems and gas supply systems up to 16bar.

✓ Production

Production of heating boilers, warm air stoves and sauna stoves; Production of storage tanks and water heating boilers; Production of chimneys, chimney liners and air ducts; Production of metal sheets, tinplate and pipe blanks.

✓ Trade

Shop "Santehnikas centrs" - retail sale of plumbing materials and home-made products; Warehouse Ltd "Grobiņas SPMK" - wholesale of plumbing materials and self-produced products.

✓ Services

Rental of specialized road transport, construction machinery and equipment; Estimation services and cooperation with design offices; Construction supervision services.

About the company:

Saint-Gobain is an international company with a presence in 67 countries. The company designs, manufactures and distributes building and construction materials, thermal insulation and sound insulation materials.

Description:

JKR Autocentrs offers:

✓ Car diagnostics; ✓ Engine, suspension and brake repair; ✓ Maintenance; ✓ Wheel alignment; ✓ Tyre installation and adjustment; ✓ Spare part retail; ✓ Welding; ✓ DPF filter cleaning; ✓ DPF/EGR/ADBlue programming; ✓ Stage1 chip tuning

Car service station services:

We offer to Autocentrs customers: technical maintenance and repairs, vehicle preparation for technical inspection at CSDD, tire mounting and balancing, oil change in the engine and units, electrical system diagnostics and repairs, fuel system diagnostics and replacement, replacement of vehicle components and units, vehicle suspension diagnostics and repairs, a/m engine, head repair and replacement, air conditioning system check, filling and maintenance, a/m exhaust gas check and adjustment, wheel geometry check and adjustment, shock absorber efficiency check, brake system check and adjustment, car body geometry restoration on CAR -Repair and/or replacement of O-LINER stand, body parts. Repair of plastic parts, replacement of windshields, painting of car bodies or their parts in a specially designed painting chamber with SPIES HACHER water-based painting materials. We also offer car evacuation to service, car rental services, as well as service exchange car.

"EK Sistēmas" product groups:: ✓ Low-voltage equipment ✓ Automation ✓ Installation materials ✓ Series of switches, rosettes ✓ Cable ducts, rails, stairs ✓ Lighting ✓ Cables and wires "EK Sistēmas" services:: ✓ Reactive power compensation solutions ✓ Electrical network measurements and analysis ✓ BMS project development ✓ Lighting calculations, measurements, experiments ✓ Seminars and training

Manufacture of fittings:

✓ Reinforcement bars; ✓ Fabricated and bent fittings; ✓ Armature meshes; ✓ Armature frameworks; ✓ Reinforcement mats; ✓ Armature spacers; ✓ Armature wholesale; ✓ Metal sheets, square tubes. Description:

"BaltMetExport" is a reliable supplier of steel reinforcement for the Baltic and Scandinavian regions. With years of experience in the industry, we supply high-quality steel reinforcement products that meet the stringent standards of construction projects in the region.

✓ Our wide range of steel reinforcement solutions meet a variety of construction needs including residential, commercial and industrial projects. ✓ We offer rebars, their lengthening and bending, rebar frames, screens, mats, bar connection systems, rebar spacers, as well as detailing services, tn. preparation of armature specification from drawings for production; also metal sheets and pipes.

"Top Trans" services:: ✓ car service station; ✓ car maintenance; ✓ passenger car, truck and commercial vehicle tires; ✓ tyre assembly; ✓ car discs; ✓ car chemicals; ✓ car accessories. LTD "Top Trans" – Your trusted car service in Tukums!:

We offer a full range of services: car repair, maintenance, tire fitting and tire change. We are the only official representative of PREVAL aerosols in the Baltics. Car repair, service and tires in Tukums - choose quality with "Top Trans" !

Biomass boiler systems, metalworking and full-cycle production:

"EcoHeat Technologies" offers full-cycle production services, from design to delivery and service of the finished product.

Services include: metalworking, welding, development and production of biomass heating systems, cast iron castings, hydraulic solutions, as well as final assembly and technical service. The company's technical base allows us to implement complex industrial projects with high precision and quality.

Car repair, tire service and technical inspection preparation:

Ltd. Ltd "Saules serviss" offers a wide range of services:

✓ running gear repair; ✓ tyre repair and change; ✓ exhaust pipe repair and welding; ✓ technical maintenance; ✓ toe-in adjustment; ✓ brake diagnostics on a stand; ✓ body repair and painting; ✓ preparation for technical inspection; ✓ assistance in passing technical inspection.

The service provides both regular car maintenance and more complex repairs.

Description:

LTD "Airwave" was founded in 2008 and is engaged in the wholesale of air conditioners, ventilation equipment, heat pumps, humidifiers and dehumidifiers, air curtains and liquid coolers. Our company represents brands such as Daikin Group, Midea, Clivet, Flexit, Emerson, Nordmann Engineering, Dimplex, Cooltek, Thermia/Danfoss. We provide full-fledged information about the represented products, as well as deliver spare parts during the warranty and post-warranty period. The high quality of our services is confirmed by the ISO 9001 2008 certificate.

Services, what is offered by SIA "AFI":

Our range of services includes agricultural machinery spare parts, tools, batteries and bearings. We also offer maintenance services that ensure your tractors and agricultural machinery run smoothly.

Why choose a LLC? "AFI" ?:

Choosing a LLC "AFI", you get a partner who understands the requirements of agricultural machinery. We guarantee quality products, fast delivery and professional service so that your equipment is always in working order.

✓ Steering rod replacement 20-45 EUR ✓ Front shock absorber replacement 35-65 EUR ✓ Rear shock absorber replacement 25-45 EUR ✓ Rear axle axle replacement 30-85 EUR ✓ Replacement of front levers 25-65 EUR ✓ Clutch change 120-350 EUR ✓ Conditioner refill 45-80 EUR ✓ Conditioner system diagnostics 25-35 EUR

About the company:

LTD "Steel Tech" is 2009., which offers an assortment of black steel, stainless steel and aluminum products. The supply of non-standard products and special steels is one of the business profiles of our company. Our clients are companies in metalworking, construction, design and many other industries. We cooperate with the largest European manufacturers and service centers. A wide assortment of materials in the Riga warehouse, which is continuously improved based on customer demand. For all metal products, we provide production certificates and factory performance declarations.

Diesel nozzle, pump repair and fuel system maintenance:

"Diesel Test" offers full-service services for diesel engine fuel systems, ensuring high-quality repair and maintenance.

Services include: diesel injector repair and inspection, diesel pump repair, Common Rail system diagnostics, glow plug and injector disassembly, fuel system cleaning, as well as diesel engine maintenance and diagnostics.

The service center serves both passenger and commercial vehicles, ensuring an individual approach to each client and technically precise execution of work.

"BMI Latvija" offers:: ✓ Monier concrete tiles ✓ Monier clay tiles ✓ Monier roofing membranes or underlayments ✓ Monier roof accessories - for sealing, roof ventilation, steps, roof bridges, snow barriers, etc. ✓ Icopal bitumen rolls ✓ Icopal bitumen mastics and primers ✓ Icopal PVC synthetic membranes ✓ Icopal green roof systems ✓ Icopal materials for transportation projects - bridges, railways, parking lots, etc. ✓ Schiedel ceramic chimneys ✓ Schiedel stainless steel chimneys ✓ Schiedel outdoor fireplaces ✓ Schiedel fireplace paint